Getting started

From setup
to the finish line.

A practical guide to timing a club race with DB Timer.

Before the runners arrive

  1. Create a race for each distance or time class. Use clear names that match the event.
  2. Open Race Details and confirm the format. Choose Single Loop for one finish crossing, Fixed Laps for a specified lap count, or Timed Laps for a duration. Timed-race durations are entered in minutes. For example, a two-hour race uses 120 minutes.
  3. Add runners or import a CSV. Confirm each runner’s race, bib, name, and gender for results. Use unique numeric bibs across the event.
  4. If using named heats, assign each runner to the correct heat. Run the readiness checks and create a backup.

Start each race

Select the exact race or heat in the timing controls and start it at the group’s actual start. Other races can start later. Use Batch when selected groups should share a reviewed start instant.

Check the control board for the correct names and start times. The selected timing target controls race commands and which history is displayed.

Record finishes and laps

Enter a runner’s bib on the Timer keypad and tap the record button at their crossing. A unique bib routes to its race. Check the runner feedback and recorded time.

For a single-loop race, the first valid finish crossing creates the official finish. For a fixed-lap race, record each completed lap until the required lap count is reached. For a timed race, record each completed lap through the cutoff and retain the splits.

The start is lap zero.
Record the first lap crossing after one full lap. Recording the departure from the start would credit an extra lap.

The submission time is the recorded crossing time. If runners arrive together, keep their observed order and times in a separate line log.

Confirm and correct entries

A repeat entry within 60 seconds asks you to confirm or discard it. Confirm only a separate crossing. Use Corrections to insert an earlier missed crossing at its observed time.

Undo Last on Timer follows the latest operator action across races. The Corrections screen offers more specific adjustments and keeps an operator name, reason, and audit trail.

Review the cutoff

A crossing exactly at the race’s cutoff counts. A submission after it is saved for review. Use the Timer’s review button or open Corrections for that race.

  1. Select the pending crossing.
  2. Enter the observed crossing date, time, and seconds from the line log.
  3. Fill in the operator and reason.
  4. Choose Accept lap for a valid crossing within the race window, or Reject entry for an entry that should not count.

Until accepted, the pending entry contributes no lap and no place.

Check and export results

Review results separately for every race, including its top three men and women. Single-loop and fixed-lap races rank eligible finishers by elapsed time from their effective starts. Timed races rank by counted full laps first, then elapsed time to the last counted lap.

Resolve pending entries and reconcile results with the line log before awards. Export the results CSV and retain a backup of the meet.